WE ONLY SELL AND SHIP TO CONTINENTAL U.S.A.

Specializing in Local Customer Communication - No International Calls Accepted.

NEW POWER PERKS REWARDS

SIGN -UP FOR OUR REWARDS PROGRAM AND RECEIVE 100 POINTS

Selling fast!
Grab yours while you can
Suncoast Audio Direct

Teac TN-3B-SE Manual Belt-Drive Turntable - SAEC Tone Arm

$529.99

Description
A new, high-performance standard for belt-drive analog turntables. The TN-3B-SE is a stylish, sleek-looking belt-driven turntable with a built-in MM-type PHONO EQ amplifier.It employs a new tonearm with knife-edge, pivot-point bearings, collaborated with SAEC, the high-end tonearm manufacturer, for superlative stability and resolution. The belt-drive mechanism, meanwhile, helps mitigate any unwanted cogging effects (ie fine pulsing) from the operation of the motor, to ensure a precise and smooth platter rotation. The TN-3B-SE also employs a VM-type cartridge the AT-VM95E manufactured by audio-technica and a high-precision NJM8080 op-amp in its in-built Phono EQ amplifier, allowing the user to enjoy the sound of their vinyl records with low distortion and in high quality.The TN-3B-SE delivers a natural and well-balanced sound quality and is quick and easy to set up and start enjoying. We believe it sets a new standard that will satisfy the needs of both audiophiles and ardent record collectors.
*Loyalty power perk rewards terms and conditions

Earn [points_amount] when you buy this item.

Amplifier section
Max output power 130W + 130W (4Ω, 1kHz, JEITA)
90W + 90W (8Ω, 1kHz, JEITA)
Rated output power 115W + 115W (4Ω, 1kHz, THD 0.8%)
70W + 70W (8Ω, 1kHz, THD 0.8%)
Total harmonic distortion 0.002% (8Ω, 1kHz, 12.5W, JEITA)
Signal-to-Noise ratio 110dB (8Ω, 1kHz, IHF-A)
Frequency response 10Hz to 50kHz (-5dB, 8Ω, 1W, JEITA)
Input section
LINE IN (Balanced)
Connector XLR (2: HOT) × 1 pair
Max input level 3Vrms
LINE IN (Unbalance)
Connector RCA (gold-plated) × 3 pairs
Max input level 2.5Vrms
Speaker output
Connector Screw-type × 1 set (gold-plated, Compatible with AWG8 and Banana-plugs)
Supported speaker impedance 4Ω to 8Ω
Headphone output
Connector 1/8" (3.5mm) 4-pole stereo jack
Type of connection Ground separate
Max output power 360mW + 360mW (32Ω loaded, THD 10%, JEITA)
Frequency response 5Hz to 150kHz (–3dB)
Total harmonic distortion 0.003% (Output power 30mW 32Ω loaded)
Signal-to-Noise ratio 115dB
Power
AC120V, 60Hz
AC220 - 240V, 50/60Hz
Power consumption 110W
Standby power 0.1W or less (at Auto-power saving mode)
Overall dimensions 11.4" × 3.2" × 10.4" / 290 × 81.2 × 264mm (W × H × D)
Weight 9.27 lbs. / 4.2kg
Included accessories Power cord, Remote control (RC-1332), AAA batteries × 2, Owner's manual (incl. Warranty card)
※ Design and specifications may subject to change without notice.
※ RoHS complied


Shop all
Suncoast Audio Direct

Teac TN-3B-SE Manual Belt-Drive Turntable - SAEC Tone Arm

$529.99

A new, high-performance standard for belt-drive analog turntables.

The TN-3B-SE is a stylish, sleek-looking belt-driven turntable with a built-in MM-type PHONO EQ amplifier.

It employs a new tonearm with knife-edge, pivot-point bearings, collaborated with SAEC, the high-end tonearm manufacturer, for superlative stability and resolution. The belt-drive mechanism, meanwhile, helps mitigate any unwanted cogging effects (ie fine pulsing) from the operation of the motor, to ensure a precise and smooth platter rotation. The TN-3B-SE also employs a VM-type cartridge the AT-VM95E manufactured by audio-technica and a high-precision NJM8080 op-amp in its in-built Phono EQ amplifier, allowing the user to enjoy the sound of their vinyl records with low distortion and in high quality.

The TN-3B-SE delivers a natural and well-balanced sound quality and is quick and easy to set up and start enjoying. We believe it sets a new standard that will satisfy the needs of both audiophiles and ardent record collectors.

Color

View product